P0505 Idle Air Control Motor Circuits

NAME OF CODE
Idle Air Control Motor Circuits

WHEN MONITORED
At key on and battery voltage greater than 11.5 volts.

SET CONDITION
The PCM senses a short to ground or battery voltage on any of the tour IAC driver circuits for 2.75 seconds while the IAC motor is active. The PCM senses an open circuit on start up.

THEORY OF OPERATION
The idle air control motor is used by the PCM to help regulate idle speed. The motor controls the amount of air allowed to bypass the throttle blade. The PCM controls the notor using four driver circuits to position the stepper motor.

POSSIBLE CAUSES
- Driver circuit shorted to ground
- Driver circuit shorted to battery
- Driver circuits shorted together
- Failed PCM
- Shorted IAC motor
- Connector terminals
- Connector wires
- Driver circuit open