Brake Rotor/Disc: Specifications
Brake Rotor Specifications| BRAKE ROTOR | Front | Rear |
| BRAKE ROTOR TYPE | Vented | Vented |
| BRAKE ROTOR MATERIAL | Grey Iron, Dacromet-Coated | Grey Iron, Dacromet-Coated |
| ROTOR DIAMETER | 330 mm (13.0 in.) | 330 mm (13.0 in.) |
| ROTOR THICKNESS | 31.60 - 32.13 mm (1.244 - 1.265 in.) | 21.60 - 22.13 mm (0.850 - 0.871 in.) |
| MINIMUM ROTOR THICKNESS Minimum allowable thickness markings are cast/stamped on an un-machined surface of the rotor. This marking includes 0.76 mm (0.030 in.) allowable rotor wear beyond the recommended 0.76 mm (0.030 in.) of rotor refacing. | 30.4 mm (1.197 in.) | 20.4 mm (0.803 in.) |
| ROTOR THICKNESS VARIATION | 0.013 mm (0.0005 in.) | 0.013 mm (0.0005 in.) |
| ROTOR RUNOUT * * TIR - Total Indicator Reading (measured on vehicle) | 0.08 mm (0.003 in.) | 0.08 mm (0.003 in.) |
| ROTOR MICRO-FINISH | 15 - 80 RMS | 15 - 80 RMS |