Radio/Stereo: Service and Repair

REMOVAL

Center Bezel:

1. Remove instrument panel center bezel and disconnect the cigar lighter and fog lamp switches wire connectors.

Instrument Panel:

2. Remove right and left side knee bolster.
3. Remove headlamp switch knob, by inserting a paper clip in the hole under the knob, and pushing gently to release the lock clip.
4. Remove the tilt wheel handle.
5. Remove instrument panel bezel.
6. Remove two radio mounting screws.

Radio Removal:

7. Remove radio and disconnect wire connector, coaxial cables and antenna cable.

WARNING: The locator plug on rear of radio must be inserted into hole in instrument panel for correct installation.

INSTALLATION
For installation reverse the above procedures.