Turn Signal Flasher: Service and Repair

WARNING: ON VEHICLES EQUIPPED WITH AIR-BAGS, REFER TO AIR BAGS AND SEAT BELTS/AIR BAGS BEFORE ATTEMPTING STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY.

REMOVAL
1. Disconnect and isolate the battery negative cable.

Combination Flasher Location:

2. Remove the knee blocker/lower steering column cover trim panel.
3. Remove the combination flasher from the fuse block module.

INSTALLATION
1. To install the flasher, align the terminals with the cavities in the fuse block module and push the flasher firmly into place.
2. Connect the battery negative cable.
3. Test the combination flasher operation.
4. Install the knee blocker/lower steering column cover trim panel.