Fog/Driving Lamp Bulb: Service and Repair

REMOVAL
1. Rotate front tire inboard.
2. Remove rubber plug (4" diameter) from radiator closure panel splash area.
3. Remove rubber seal on fog lamp through 4" hole in closure panel splash area.
4. Release spring wire retainer from fog lamp and remove bulb.

CAUTION: Do not touch the glass of halogen bulbs with fingers or any possibly oily surface, reduced bulb life will result.

INSTALLATION
1. Install new bulb and reposition into fog lamp back.
2. Squeeze and reposition spring wire to secure bulb to fog lamp.
3. Push and replace seal to back of fog lamp.
4. Replace the 4" diameter seal to the closure panel splash area.