Wiper Control Module Outputs
CIRCUIT OPERATIONThe following covers the outputs from the wiper control module.
Low Speed
The module provides a ground path for the wiper motors when the operator has requested LOW speed operation. Circuit V49 is used for the driver's motor, and circuit V61 is used for the passengers motor.
High Speed
The module provides a ground path for the wiper motors when the operator has requested HIGH speed operation. Circuit V14 is used for the driver's motor, and circuit V44 is used for the passengers motor.
Speed Signal Feed
The wiper control module sends voltage to the wiper motors to determine wiper motor speed. Circuit V54 is used for the driver's side motor, and circuit V55 is used for the passengers side motor.