Timing Chain Cover External Oil Seal
Timing Chain Cover External Oil SealREMOVAL
1. Remove air cleaner and tube assemblies.
2. Remove drive belt. Refer to Cooling System for procedure.
3. Remove crankshaft pulley and damper.
4. Using Tool C-4679A to remove oil seal. Be careful not to damage the crankshaft seal surface of cover.
INSTALLATION
1. Install new seal by using Tool MD 998306.
2. Place seal into opening with seal spring towards the inside of engine. Install seal until flush with cover.
3. Install vibration damper and pulley.
4. Install drive belt (Refer to Cooling System) for installation procedure.
5. Install air cleaner and tube assemblies.