Temperature Warning Lamp/Indicator: Description and Operation
CIRCUIT OPERATIONThis lamp is used to indicate to the operator when the engine oil pressure has dropped below a pre-determined pressure or the engine coolant temperature has exceeded a pre-determined temperature.
Power for the lamp is supplied on circuit G5. This circuit is protected by a 5 Amp fuse located in cavity 8 of the fuse block and is HOT in the START and RUN position only Power for the fuse is supplied on circuit A21 from the ignition switch.
Power for the A21 circuit is supplied on circuit A1. This circuit is protected by a fusible link located near the auxiliary jumper post on the left toe box.