Front Door Panel: Service and Repair

Door Trim Panel:

DOOR TRIM PANEL
1. Remove screws holding seat belt bezels to door trim panel.
2. Separate seat belt bezels from door trim.
3. Remove screw holding trim to door panel from below latch release handle.
4. Remove screws holding arm rest pull cup to inner door panel.
5. Remove screws holding bottom of trim panel to inner door panel.
6. Pull outward at top of trim panel to disengage trim clips holding trim panel to inner door panel.
7. Pass seat belt webbing through access splits in trim panel.
8. Separate trim panel from door.
9. Reverse the preceding operation for installation.

Door Stanchion Trim:

DOOR STANCHION TRIM REMOVAL
1. Remove door glass.
2. Remove shoulder harness turning loop trim cover.
3. Remove bolt turning loop to door stanchion.
4. Remove sport cap interlock striker.
5. Disengage clips holding close out trim to stanchion.
6. Separate close out trim from stanchion.
7. Remove screws holding stanchion trim to door stanchion.
8. Separate trim from door stanchion.
10. Reverse the preceding operation for installation.