13A Stored Trouble Codes

Diagnostic Chart:

NOTE: Perform TEST 1A Before Proceeding. 1A Identifying Airbag System Problems


1. Remove all Jumper wires and reconnect all previously disconnected components (except the battery).

2. Turn the ignition key on and reconnect the battery.

3. Connect the DRB to the data link connector (use the most current software available).

4. Use the DRB to erase the stored codes.

5. Turn the ignition off and wait 15 seconds before turning the ignition on.

6. Wait one minute, and read the active codes.

7. Does the DRB show any active codes?
- YES - Perform Airbag Test 1A. 1A Identifying Airbag System Problems
- NO - Perform step number 8.

8. With the DRB read the stored codes.

9. Does the DRB show any stored code?
- YES - Perform Airbag Test 1A. 1A Identifying Airbag System Problems
- NO - System operating properly at this time.