Loss of Ignition Run/Start

NAME OF CODE
Loss of Ignition Run/Start

NOTE
This code becomes active as soon as the malfunction is detected and stored after 1 minute of occurrence, or key-OFF, whichever is first.

WHEN MONITORED
Continuously with the ignition ON.

SET CONDITION
With ignition ON, the ignition run/start circuit voltage is other than expected.

POSSIBLE CAUSES
- Open fused ignition switch output circuit (run/start)
- Open fuse
- Open ignition switch output circuit
- Loose or poor connection at connector terminals
- Faulty ignition switch
- Faulty passenger airbag ON/OFF switch (if equipped)
- Faulty airbag control module