Timing Cover: Service and Repair

1. Disconnect battery.

2. Release fuel system pressure as outlined under ``Fuel System Pressure Release.''

3. Remove upper radiator crossmember.





4. Remove the engine cooling fan module.

5. Remove the accessory drive belts.

Wrench Holder:

6. Use Special Tool C-3281, or equivalent to hold crankshaft damper while removing center bolt.





7. Remove crankshaft damper.









8. Remove the stamped steel cover. Do not remove the sealer on the cover, it is reusable. If some sealer is missing use Mopar Silicone Rubber Adhesive Sealant or equivalent to replace the missing sealer.

9. Remove the left cast cover.

10. Remove the lower belt cover located behind the crankshaft damper.

11. Reverse removal procedures for installation.