Shift Rail Bushings

SHIFTER SELECTOR SHAFT BUSHING





Removal
1. Thread tool #6786, or equivalent into bushing.
2. Install slide hammer #C-3752, or equivalent onto tool and remove bushing using slide hammer.





Installation
1. Position replacement bushing over selector shaft bore.
2. Using an appropriate size deep well socket, install bushing in selector shaft bore.





SHIFTER CROSSOVER SHAFT BUSHING

Removal
1. Install slide hammer #C-3752, or equivalent through the crossover bushing.
2. Thread nut and washer onto slide hammer.
3. Using the slide hammer, remove the crossover shaft bushing.

Installation
1. Position the replacement crossover shaft bushing over the crossover shaft bushing bore.
2. Using an appropriate size deep well socket, install the crossover shaft bushing into the bushing bore.