Heated Backlite LED/Heated Mirrors - Inoperative
NO: 08-71-94GROUP: Electrical
DATE: Dec. 9, 1994
SUBJECT:
Heated Backlite LED/Heated Mirrors Inoperative
MODELS:
1995 (JA) Cirrus/Stratus
NOTE:
THIS BULLETIN APPLIES TO SOME VEHICLES BUILT BEFORE OCT. 19, 1994 (MDH 10-19-XX).
SYMPTOM/CONDITION:
LED on heated backlite switch and heated glass in rear view mirrors are inoperative (heated backlite does work and mirrors move mechanically). Fuse # 6 repeatedly blows.
PARTS REQUIRED:
2 4778570 Tube, Heat Shrink
REPAIR PROCEDURE:
This bulletin involves adding heat shrink tubing to the heated rear view mirror terminals.
1. To remove glass from heated rear view mirror, push lock tab to outside of glass. It will require a fiber stick (trim stick) and a good deal of force.
2. Once glass is loose from backing plate, remove one of the two heated glass terminals from the back of the glass.
3. Place heat shrink tube over metal terminal on wire and heat with hot air gun to secure. Let cool.
4. Connect terminal to back of glass.
5. Position glass assembly over backing plate to secure. Be sure all four ears of glass are seated in four notches in backing plate.
6. Hold glass firmly against backing plate and push lock tab inboard to lock glass assembly. Pull on glass edge to ensure glass assembly is locked to backing plate.
7. Repeat procedure on other side of vehicle.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No: 08-91-PD-91 0.3 Hrs.
FAILURE CODE: XX - Service Adjustment