Child Protection Lock - Will Not Engage
NO: 23-42-95GROUP: Body
DATE: Jul. 21, 1995
SUBJECT:
Child Protection
Lock Engagement
MODELS:
1995 (JA) Cirrus/Stratus
SYMPTOM/CONDITION:
Child protection lock control will not move to the "engage" position.
DIAGNOSIS:
Loosen two rear door trim panel attaching screws (one in the arm rest pull cup and one behind the door latch handle). Push door trim panel rearward and tighten screws. If child protection lock still will not engage, perform the repair procedure.
PARTS REQUIRED:
AR 4646304 Latch Linkage, Right Rear Door
AR 4604605 Latch Linkage, Left Rear Door
REPAIR PROCEDURE:
This bulletin involves replacing bent rear door latch linkage.
1. Remove the door trim panel on affected door.
2. Replace bent latch linkage.
3. Install door trim panel as far rearward as possible, being careful not to bend latch link.
POLICY: Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No: 23-41-18-90 Loosen Door Panel, Push 0.1 Hrs.
Rearward And Check
Latch Operation
FAILURE CODE: XX - Service Adjustment
23-41-18-91 Latch Linkage Replace, Left Door 0.3 Hrs.
23-41-18-92 Latch Linkage Replace, Right Door 0.3 Hrs.
FAILURE CODE: 06 - Bent