System Specifications
Accelerator cable free playM/T 1-2 mm (.04-.08 in.)
A/T 3-5 mm (.12-.20 in.)
Firing order 1-2-3-4-5-6
Idle speed [1] 700 ± 100 RPM
Idle speed W/ AC ON [1]
M/T (in neutral) 900 RPM
A/T (in D range) 650 RPM
Idle mixture NOT ADJUSTABLE
TIGHTENING TORQUE SPECIFICATIONS:
Accelerator cable adjustment bolts 5 Nm (4 ft-lbs)
Air bypass valve (hose clamp) 4 Nm (3 ft-lbs)
Air hoses (hose clamps) 4 Nm (3 ft-lbs)
Air pipe mounting bolts] 12-15 Nm (9-11 ft-lbs)
Drain plug 13-20 Nm (10-15 ft-lbs)
Drain plug (ID"7")[2] 17-26 Nm (12-19 ft-lbs)
Fuel filter line to fuel filter (eye bolt) 30 Nm (22 ft-lbs)
Fuel pressure regulator installation bolts 9 Nm (7 ft-lbs)
Fuel rail cross-over pipe installation bolts 10-13 Nm (7-9 ft-lbs)
Fuel rail installation bolts 10-13 Nm (7-9 ft-lbs)
High pressure hose to fuel filter 30 Nm (22 ft-lbs)
High pressure hose to fuel rail 5 Nm (4 ft-lbs)
High pressure hose to fuel pump 35 Nm (25 ft-lbs)
Intercooler to body 10-13 Nm (7-9 ft-lbs)
Main pipe to fuel filter line 35 Nm (25 ft-lbs)
Main pipe to high pressure hose 30 Nm (22 ft-lbs)
Oil pipe to engine 17 Nm (12 ft-lbs)
Oil pipe to turbocharger (front turbo) 17 Nm (12 ft-lbs)
Oil pipe to turbocharger rear turbo 20 Nm (14 ft-lbs)
Oil return pipe 9 Nm (7 ft-lbs)
Throttle body to surge tank bolts 10-13 Nm (7-9 ft-lbs)
TPS mounting screws 2 Nm (1.5 ft-lbs)
Wastegate actuator 10 Nm (7 ft-lbs)
Water pipe mounting bolts 10 Nm (7 ft-lbs)
Water pipe eye bolts 31 Nm (22 ft-lbs)
[1] Refer to ADJUSTMENT PROCEDURES.
[1][2]Adjustments
[2] Refer to FUEL TANK under COMPONENT REPLACEMENT AND REPAIR PROCEDURES for clarification.
Service and Repair