C. Replace the Fuel Outlet Rail

NOTE:
Only those vehicles that exhibit fuel leakage on the outlet side of the fuel rail, as determined by the leak test in Section "A", require fuel outlet rail replacement. Very few vehicles are expected to require fuel outlet rail replacement.

1. Using a flat thin screwdriver, carefully pry the three fuel injectors out of the old outlet rail.

2. Remove the upper and lower 0-rings from the injectors.

3. Lightly lubricate the supplied injector 0-rings with clean engine oil.

4. Install the new upper and lower 0-rings onto the injectors.

5. Install the injectors into the new Outlet rail. Make sure to index the injectors so that the notch on the injector is aligned with the tab in the fuel rail.

6. Continue with Section "D" -- Assemble and Install Fuel Rail.