Airbag System
DTC 21, 22 Inspection Procedure:
Battery/SDU Disconnect:
1. Turn the ignition key to the "LOCK" position, disconnect the negative battery cable and tape the terminal.
Caution:
Wait at least 60 seconds after disconnecting the battery cable before doing any further work. (Refer to Service Precautions.)
2. Remove the floor console assembly. (Refer to GROUP 23A - Floor Console.)
3. Place a flat-tipped screwdriver against the lock spring at the lock lever notch and push the spring toward the unit.
Caution:
Do not use excessive force to raise the lock lever (green).
DTC 21,22 Diagnosis:
