Airbag System

DTC No. 11, 12, 13 Inspection Procedure:

Battery/SDU Disconnect:

1. Turn the ignition key to the "LOCK" position, disconnect the negative ballery cable and tape the terminal.

Caution
Wait at least 60 seconds after disconnecting the battery cable before doing any further work. (Refer to Service Precautions.)


2. Remove the floor console assembly. (Refer to GROUP 23A - Floor Console.)


3. Place a flat-tipped screwdriver against the lock spring at the lock lever notch and push the spring toward the unit.


Caution
Do not use excessive force to raise the lock lever (green).

DTC 11, 12, 13 Diagnosis: