Fuel Injector Resistance Test

Measurement of Resistance between Front Bank Terminals

1. Disconnect the injector connector.

Checking Fuel Injector:

2. Measure the resistance between terminals.

Standard value: 13 - 16 ohms [at 20°C (68°F)]

3. Install the injector connector.

Measurement of Resistance between Rear Bank Terminals

Injector Intermediate Harness Connector:

1. Disconnect the injector intermediate connector.





2. Measure resistance between terminals.

Injector No. Measuring terminals Resistance

No. 2 1 - 2 13 - 16 ohms
No. 4 1 - 3 [At 20°C (68°F)]
No. 6 1 - 4