Engine and Transaxle Total Control Signal (A/T)

Engine And Transaxle Total Control Signal Circuit:

PURPOSE
To provide better transaxle shifting and limit traction loss during acceleration.

LOCATION
The modules are both located under behind the center console.

OPERATION
There are 3 communication lines providing torque reduction request and torque reduction execution (retared timing) signals. They connect the Engine Control Module (ECM) with the transaxle control module. Two of these lines send 5 Volts from the ECM to the transaxle control module. The other provides 5 Volts from the transaxle control module to the ECM.

Communication between control modules is accomplished by switching ground circuits of the 5V reference signal "ON" or "OFF" as determined by the proper control module for driving conditions.