Misc. Engine Components

* ALL FASTENERS SHOULD BE CLEAN AND LIGHTLY OILED.

A/C Compressor to Bracket Bolt	7/16"-14	50 Foot Pound-Force (ft.lb)
A/C Compressor Support Bolts	3/8"-16	30 Foot Pound-Force (ft.lb)
Alternator Adjusting Strap Bolt	5/16"-18	200 Inch Pound-Force (in.lb)
Alternator Adjusting Strap Mounting Bolt	3/8"-16	30 Foot Pound-Force (ft.lb)
Alternator Bracket Bolt	3/8"-16	30 Foot Pound-Force (ft.lb)
Alternator Mounting Pivot Nut	3/8"-16	30 Foot Pound-Force (ft.lb)
Camshaft Sprocket Lock Bolt	M10 x 1.5	40 Foot Pound-Force (ft.lb)
Camshaft Thrust Plate	M6 x 1	105 Inch Pound-Force (in.lb)
Chain Case Cover Bolt	M8 x 1.25	20 Foot Pound-Force (ft.lb)
	M10 x 1.5	40 Foot Pound-Force (ft.lb)
Connecting Rod Nut	3/8"-24	40 Foot Pound-Force (ft.lb) + 1/4 turn (DO NOT USE A TORQUE WRENCH FOR THIS STEP)
Crankshaft Pulley Screw to Crankshaft	M10 x 1.5	40 Foot Pound-Force (ft.lb)
Cylinder Head Bolt	M8 x 1.25	25 Foot Pound-Force (ft.lb)
	M11 x 1.5 (Step 1)	45 Foot Pound-Force (ft.lb)
	M11 x 1.5 (Step 2)	65 Foot Pound-Force (ft.lb)
	M11 x 1.5 (Step 3)	65 Foot Pound-Force (ft.lb)
	M11 x 1.5 (Step 4)	+ 1/4 turn DO NOT USE A TORQUE WRENCH FOR THIS STEP.
Cylinder Head Cover Bolts	M6 x 1.0	105 Inch Pound-Force (in.lb)
Exhaust Manifold Screws	M8 x 1.25	200 Inch Pound-Force (in.lb)
Exhaust Crossover Pipe Flange Nut/Bolt	M10 x 1.5	25 Foot Pound-Force (ft.lb)
Intake Manifold Bolt	M8 x 1.25	200 Inch Pound-Force (in.lb)
Intake Manifold Gasket Retaining Screws	M6 x 1	105 Inch Pound-Force (in.lb)
Intake Manifold Plenum Bolt	M8 x 1.75	250 Inch Pound-Force (in.lb)
Main Bearing Cap Bolt	M11 x 1.5	30 Foot Pound-Force (ft.lb) + 1/4 turn (DO NOT USE A TORQUE WRENCH FOR THIS STEP)
Oil Filter Attaching Nipple	3/4"-16	30 Foot Pound-Force (ft.lb)
Oil Level Sensor Plug	3/4"-16	20 Foot Pound-Force (ft.lb)
Oil Pan Drain Plug	1/2"-20	20 Foot Pound-Force (ft.lb)
Oil Pan Screw	M6 x 1.0	105 Inch Pound-Force (in.lb)
Oil Pressure Gauge Sending Unit	1/8" NPTF	60 Inch Pound-Force (in.lb)
Oil Pump Cover Bolt T-30	M6 x 1.0 x 18	105 Inch Pound-Force (in.lb)
Oil Pump Pick-up Tube Screw	M8 x 1.75	250 Inch Pound-Force (in.lb)
PCV Valve	3/8"-16 NPTF	60 Inch Pound-Force (in.lb)
Rocker Shaft Bracket Bolt	5/16"-18	250 Inch Pound-Force (in.lb)
Spark Plug	14 mm	20 Foot Pound-Force (ft.lb)
Starter Mounting Bolt	7/16"-14	50 Foot Pound-Force (ft.lb)
Strut Intake Manifold to Cylinder Head Bolt	M10 x 1.5	40 Foot Pound-Force (ft.lb)
Tappet Retainer Yoke Screw	M6 x 1	105 Inch Pound-Force (in.lb)
Temperature Gauge Sending Unit	1/8" NPTF	60 Inch Pound-Force (in.lb)
Timing Chain Snubber Screw	M6 x 1.0	105 Inch Pound-Force (in.lb)
Water Pump to Chain Case Cover Bolt	M6 x 1.0	105 Inch Pound-Force (in.lb)