Disassembly

ANNULUS GEAR AND TRANSFER DRIVE GEAR SET




Disassembly steps

1. Snap ring
2. Stopper plate
3. Bearing
4. Bearing
5. Transfer drive gear
6. Snap ring
7. Output flange
8. Annulus gear




BEARING/TRANSFER DRIVE GEAR REMOVAL

1. Using the special tool, remove the transfer drive gear together with two bearings from the output flange.

Caution: Install the special tool in position between the output flange and bearings.




2. Using the special tool, remove the bearings from both sides of the transfer drive gear.