Air Bag Module Disposal Procedures

Prior to scrapping an airbag module, the airbag module must be deployed. Refer to,"Maintenance Procedures/Airbag Module Deployment", for airbag deployment procedures.
The inflator will be quite hot immediately following deployment, allow 30 minutes before handling or disposing of module. Do not place water or oil on the airbag module. Wear safety glasses, rubber gloves, particle dust mask and protective clothing with long sleeves when handling deployed airbag module.
After deployment of the airbag module, tightly seal the airbag module in a strong vinyl bag then dispose of in the same manner as other scrap parts.