Without Cruise Control

Accelerator Cable Adjustment Bolt Locations:

1. Turn the ignition on (without starting the engine) for approx. 15 seconds minimum.
2. Loosen the adjusting bolts.
3. Adjust the accelerator cable free play.

Clearance:
0.04-0.08 in. (1-2 mm)

4. Tighten the adjusting bolts.
5. Confirm that the throttle valve fully opens and closes by operating the accelerator pedal.

Accelerator Cable Attachment Point, Throttle End:

6. Confirm that the throttle lever stopper touches the idle position switch.