Mechanical Specifications
| Anti-Rotational Strut Bracket To Stud Nut | 17 |
| Case To Engine Block Bolt | 70 |
| Crossover Cable Adjusting Screw | 70 |
| Selector Cable Adjusting Screw | 70 |
| Selector Shaft Lockpin | 105 |
| Gearshift Housing To Case Bolt | 21 |
| Gearshift Tube Clamp Bolt | 170 |
| Selector Cable Adjusting Screw | 70 |
| Selector Shaft Lockpin | 105 |
| Clutch Pressure Plate To Flywheel | 21 |
| Flywheel To Crankshaft | 70 |
| Gearshift Housing To Case Bolt | 21 Note: Tighten in a crossing pattern. |
| Mount To Block And Case Bolt | 70 |
| Strut To Block Bolt | 70 |
| Strut To Case Bolt | 70 |
| Case To Engine | 70 |
| Driveplate To Crankshaft Bolts | 55 |
| Driveplate To Clutch assembly | 50 |
| Shift Linkage Adjusting Pin | 9 |
| 5-R Blockout to Gearshift Housing | 9 |
| 5th Speed Gear (input shaft) Nut | 220 |
| Backup Lamp Switch | 20 |
| Bearing Retainer Plate | 21 |
| Differential Cover to case Bolt | 20 |
| Differential Ring Gear Bolt (A-523, A-543) | 80 |
| Differential Bearing Retainer Bolt | 40 |
| Differential Extension Housing Bolt | 21 |
| Dust Cover to Case Screw | 9 |
| End Cover to Case Bolt | 21 |
| End Cover to Bearing Retainer Bolt | 80 |
| Intermediate Shaft Bearing Strap Screw | 9 |
| Input Shaft Seal Retainer Bolt | 21 |