With T-Roof

Door Glass Adjustment:

FRONT DOOR GLASS ADJUSTMENT - VEHICLES WITH T-ROOF
1. Remove door trim panel and plastic air shield.
2. Loosen fasteners (1), (2), (3), (4), and (5).
3. With glass in down position, using stabilizers (34) push glass outboard until it contacts lower pad of outer belt weatherstrip, then tighten fasteners (1).
4. Raise glass to full up position and adjust for proper fit at roof rail, "A" pillar and quarter window area.
5. Tighten fasteners (4).
6. Tighten fasteners (3).
7. Adjust up stops (38) until contact is made with up stop flange of lift plate 15. and tighten fasteners (5).
8. Pull bracket hooks on glass lift plate (15) then tighten fasteners (2).
9. Install air shield and door trim panel.