Outside Rearview Mirror

MIRROR REMOVAL
1. Remove cover from mirror bracket by removing screws.
2. Remove three screws.
3. Unplug wires at connector.
4. To install, reverse above procedure.

MIRROR BRACKET REMOVAL
1. Remove door mouldings.
2. Drill out three 1/8" rivets from outer door skin.
3. Drill out four 1/8" rivets from inner door panel, using 1/4" drill.
4. Drill out three remaining rivets through access holes in inner door panel.
5. Removal mirror bracket assembly.
6. To install reverse above procedure.