Siren

Removal Procedure




1. Disconnect the negative battery cable.
2. Remove the wheelhouse deadner.
3. Remove the headlamp.
4. Remove the inlet pipe bolt and resonator screws.
5. Remove the siren electrical connector.
6. Remove the siren.

Installation Procedure




1. Install the siren with the mounting bolts.

Tighten
Tighten the siren mounting bolts to 3 N.m (27 lb-in).

2. Install the siren bracket with the mounting bolt.

Tighten
Tighten the siren bracket mounting bolt to 22 N.m (16 lb-ft).

3. Connect the siren electrical connector.
4. Connect the negative battery cable.