Manual Rear Window Regulator

MANUAL REAR WINDOW REGULATOR

REMOVAL PROCEDURE




1. Remove the rear door glass. Refer to Glass and Mirrors.

2. Remove the nuts and the window regulator.

INSTALLATION PROCEDURE






NOTE: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.

1. Install the window regulator with the nuts.

Tighten
Tighten the window regulator nuts to 7 N.m (62 lb-in).

2. Install the rear door glass. Refer to Glass and Mirrors.