Transaxle Bracket

TRANSAXLE BRACKET

Removal Procedure
1. Disconnect the negative battery cable.





2. Raise and suitably support the vehicle.
3. Install the transaxle jack.





4. Remove the pivot bolt.





5. Remove the bolts and the transaxle-mounting bracket from the frame.





6. Remove the bolts and the transaxle-mounting bracket from the transaxle.

Installation Procedure





1. Install the transaxle-mounting bracket on the transaxle. Install the bolts.





2. Install the transaxle-mounting bracket on the frame. Install the bolts.
- Tighten the transaxle mounting bracket bolts to 75 Nm (55 ft. lbs.).





3. Install the pivot bolt.
- Tighten the pivot bolt to 65 Nm (48 ft. lbs.).





4. Remove the transaxle jack.
5. Lower the vehicle.
6. Connect the negative battery cable.