Heating and Ventilation System

HIGH-BLOWER RELAY

REMOVAL PROCEDURE




1. Disconnect the negative battery cable.

2. Remove the access panel at the instrument cluster end of the instrument panel.




3. Reach through this opening and push back a latch holding the control panel that contains the remote mirror control and the headlamp leveling control.

4. Remove the panel from the dashboard.
5. Pull out the relay at front of the relay box.

INSTALLATION PROCEDURE




1. Align the relay contacts with the relay terminal slots.
2. Push the relay firmly into the base. The relay must be seated and flush with the base edge.
3. Replace the instrument panel access panel.
4. Replace the remote mirror/lighting control panel.
5. Connect the negative battery cable.