Siren Replacement

Removal Procedure




1. Disconnect the negative battery cable.
2. Disconnect the siren electrical connector.
3. Remove the siren bracket mounting bolt.




4. Remove the siren bracket.
5. Remove the siren mounting screws.
6. Remove the siren.

Installation Procedure




1. Install the siren on the siren bracket with the mounting screws.

Tighten
Tighten the siren mounting screws to 3 N.m (27 lb.in).




2. Install the siren bracket with the mounting bolt. Make sure that the siren bracket mounting bolt also fastens the auxiliary fan relay.

Tighten
Tighten the siren bracket mounting bolt to 11 N.m (97 lb.in).

3. Connect the siren electrical connector.
4. Connect the negative battery cable.