P1701

Conditions for Setting the DTC
- The Transmission Control Module (TCM) detects no Engine Coolant Temperature (ECT) signal for 2.5 seconds continuously.

Action Taken When the DTC Sets
- TCM will not request the illumination of the MIL or power lamp, but will store DTC when TCM detects failures on two consecutive ignition cycle.

Conditions for Clearing the MIL/Power Lamp/DTC
- The Scan-100 scan tool can clear the DTC from the TCM history.
- The TCM clears the DTC from the TCM history memory after forty consecutive ignition cycles without fault while it detects an ECT signal for 2.5 seconds continuously.