Control Valve Assembly and TFP Switch Install

CONTROL VALVE ASSEMBLY AND TR SWITCH INSTALL





1. Install the control valve body assembly to spacer plate gasket (22) onto the spacer plate (23).
2. Install the control valve body assembly (18) onto the transmission.





3. Inspect the TR switch (13) in order to verify the condition and correct location of the seven pressure switch O-rings.
4. If necessary, replace the pressure switch O-rings.





5. Install the TR switch (13) onto the control valve assembly.





6. Install the eighteen control valve assembly bolts.





7. Hand start the bolts, then tighten the bolts to 9 ft. lbs. (12 balm).