Key Interlock

Removal Procedure
1. Disconnect the negative battery cable.





2. Remove the upper and the lower steering column cover panels. Refer to Steering.

Notice: Be careful when removing the key interlock solenoid. There is a plunger with a spring attached that can become easily lost.

3. Disconnect the key interlock solenoid electrical connector and remove the key interlock solenoid screws and the key interlock solenoid.





4. Remove the key interlock unit. It is located to the left of the steering column behind the driver knee bolster.

Installation Procedure





1. Install the key interlock unit.





2. Place the spring and the plunger on the key interlock solenoid.
3. Install the key interlock solenoid and the solenoid screws.
Tighten
Tighten the key interlock solenoid screws to 2 Nm (18 inch lbs.).





4. Install the upper and the lower steering column cover panels. Refer to Steering.
5. Connect the negative battery cable.