P0713

DTC P0713 - TRANSMISSION FLUID TEMPERATURE (TFT) SENSOR CIRCUIT HIGH INPUT
Conditions for Setting the DTC
- The Transmission Control Module (TCM) detects the voltage difference of the Transmission Fluid Temperature (TFT) sensor signal is less than 75 mV 15 minutes after ignition ON.

Action Taken When the DTC Sets
- The TCM illuminates the power lamp after two consecutive trips with a failure reported.
- No increase in line pressure at low temperature.
- No auto mode change at high temperature.

Conditions for Clearing the MIL/DTC
- The TCM turns off the power lamp after three consecutive trips without a failure reported.
- The Scan-100 scan tool can clear the Diagnostic Trouble Code (DTC) from the TCM history.
- The TCM clears the DTC from the TCM history if it detects that the ATF temperature is between 0°C and 150°C for 15 minutes continuously.








DTC P0713 - Transmission Fluid Temperature (TFT) Sensor Circuit High Input