Neutral Safety Switch: Service and Repair

Removal Procedure
1. Disconnect the negative battery cable.
2. Disconnect the Park/Neutral Position (PNP) switch electrical connector.





3. Disconnect the shift control cable and the retaining clip.





4. Remove the shift lever nut and the shift lever.
5. Remove the PNP switch.

Installation Procedure
1. Install the Park/Neutral Position (PNP) switch.





2. Install the shift lever and the shift lever nut.





3. Connect the shift control cable and the retaining clip.
4. Connect the PNP switch electrical connector.
5. Connect the negative battery cable.