Front Drive Axle Inner Shaft Seal Replacement - Right Side

Front Drive Axle Inner Shaft Seal Replacement - Right Side

Special Tools
* EN 44215 - Seal Installer
* J 8092 - Universal Driver Handle

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle Service and Repair.
2. Remove the front drive axle inner shaft from the inner shaft housing. Refer to Front Drive Axle Inner Shaft and Inner Shaft Housing Replacement (8.25 F4WD Axle) Front Drive Axle Inner Shaft and Inner Shaft Housing Replacement (8.25 F4WD Axle)Front Drive Axle Inner Shaft and Inner Shaft Housing Replacement (8.25 S4WD and 9.25 Axles) Front Drive Axle Inner Shaft and Inner Shaft Housing Replacement (8.25 S4WD and 9.25 Axles)Front Drive Axle Inner Shaft and Inner Shaft Housing Replacement (9.25 Inch HD Axle) Front Drive Axle Inner Shaft and Inner Shaft Housing Replacement (9.25 Inch HD Axle).




3. Install the front drive axle inner shaft housing in a vise.
4. Using the appropriate tool, remove the front drive axle inner shaft seal (1).

Installation Procedure




1. Position the NEW front drive axle inner seal (1) so that it is even in the front drive axle inner shaft housing.




2. Using the EN 44215 - installer (2) and the J 8092 - handle (1), install the front drive axle inner seal.
3. Install the front drive axle inner shaft in the inner shaft housing. Refer to Front Drive Axle Inner Shaft and Inner Shaft Housing Replacement (8.25 F4WD Axle) Front Drive Axle Inner Shaft and Inner Shaft Housing Replacement (8.25 F4WD Axle)Front Drive Axle Inner Shaft and Inner Shaft Housing Replacement (8.25 S4WD and 9.25 Axles) Front Drive Axle Inner Shaft and Inner Shaft Housing Replacement (8.25 S4WD and 9.25 Axles)Front Drive Axle Inner Shaft and Inner Shaft Housing Replacement (9.25 Inch HD Axle) Front Drive Axle Inner Shaft and Inner Shaft Housing Replacement (9.25 Inch HD Axle).
4. Remove the support and lower the vehicle.