Engine Ground Strap REPLACEMENT

Engine Ground Strap Replacement (LMM)

Removal Procedure




1. Remove the engine ground strap bolt (2) from the rear of the cylinder head.
2. Reposition the engine ground strap (1) from the cylinder head.




3. Remove the ground strap nut (1) from the stud on the plenum front panel.
4. Remove the ground strap (2) from the stud and the vehicle.

Installation Procedure




1. Install the ground strap (2) to the vehicle and the stud on the plenum front panel.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the ground strap nut (1) to the stud on the plenum front pane and tighten to 9 Nm (80 lb in).




3. Position the ground strap (1) to the cylinder head.
4. Install the ground strap bolt (2) to the cylinder head and tighten to 16 Nm (12 lb ft).