Connecting Rod, Engine

Connecting rod

Cap bolts
1st step 64 Nm (47 lb ft)
2nd step 30 degrees
3rd step 30 degrees

6.6L (LGH), 6.6 L (LMM)
Connecting Rod Bore Diameter - Bearing End - Production Value 62.958-62.979 mm (2.4789-2.4795 in)
Connecting Rod Bore Diameter - Pin End - Service Limit 34.53 mm (1.3594 in)
Connecting Rod Bore Diameter - Pin End - Production Value 34.512-34.522 mm (1.3587-1.3591 in)
Connecting Rod Side Clearance - Service Limit 0.54 mm (0.0213 in)
Connecting Rod Side Clearance - Production Value 0.31-0.49 mm (0.0122-0.0193 in)