Rear Quarter Trim Panel Replacement - Left Side

Rear Quarter Trim Panel Replacement - Left Side

Removal Procedure




1. Remove the cargo shade/cover.
2. Remove the left body side upper trim panel. Refer to Quarter Upper Trim Panel Replacement (TrailBlazer, Envoy) (Service and Repair).
3. Remove the liftgate sill plate. Refer to Liftgate Door Sill Plate Replacement (Service and Repair).
4. Remove the left rear door sill panel. Refer to Rear Side Door Sill Trim Plate Replacement (Service and Repair).
5. Remove the lower seat belt anchor bolt.
6. Release the clips that retain the trim panel to the body.
7. Remove the trim panel from the vehicle.

Installation Procedure




1. Position the trim panel to the vehicle.
2. Position the seat belt over the top of the trim panel, ensuring that the buckle is not behind the trim panel.
3. Index the locating tabs on the trim panel to the holes in the body.
4. Seat the clips the retain the trim panel to the body.

Caution: Refer to Fastener Caution (Fastener Caution).

5. Install the seat belt lower anchor.

Tighten the anchor bolt to 70 Nm (52 lb ft).

6. Install the left rear door sill panel. Refer to Rear Side Door Sill Trim Plate Replacement (Service and Repair).
7. Install the liftgate sill plate. Refer to Liftgate Door Sill Plate Replacement (Service and Repair).
8. Install the left body side upper trim panel. Refer to Quarter Upper Trim Panel Replacement (TrailBlazer, Envoy) (Service and Repair).