Oil Pan Cover Replacement

Oil Pan Cover Replacement

Removal Procedure





1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair) .
2. Remove the oil pan cover bolts (435), cover (434), and gasket (433). Discard the gasket.



Installation Procedure





Caution: Refer to Fastener Caution (Fastener Caution) .
1. Position a NEW oil pan cover gasket (433) and the cover (434) to the oil pan and install the bolts (435). Tighten the bolts to 12 Nm (106 lb in) .
2. Lower the vehicle.