Locking Differential Clutch Disc Assembly Assemble (9.75 Inch Axle)

Locking Differential Clutch Disc Assembly Assemble (9.75 Inch Axle)




1. Apply axle lubricant, GM P/N 12378261 (Canadian P/N 10953455) or equivalent meeting GM Specification 9986115, to the surface of each disc.
2. Assemble the right side or bell-end side clutch disc assembly as follows:

1. Install the 1st non-carbon eared disc (3) to the side gear (1).
2. Install the 1st splined disc (4).
3. Install the 2nd non-carbon eared disc (5).
4. Install the 2nd splined disc (6).
5. Install the 3rd non-carbon eared disc (7).
6. Install the guide clips (2) to the clutch discs (2-7).
Apply chassis grease, GM P/N 12377985 (Canadian P/N 88901242) or equivalent, to the guide clips in order to hold the clips in place on the disc ears.