Radiator Inlet Hose Replacement

Radiator Inlet Hose Replacement (LNJ Chevrolet) (3.4L)

Removal Procedure




1. Drain the coolant. Refer to Cooling System Draining and Filling (LY7 GE 47716 Fill) (Service and Repair)Cooling System Draining and Filling (LNJ GE 47716 Fill) (Service and Repair)Cooling System Draining and Filling (LNJ Static Fill) (Service and Repair)Cooling System Draining and Filling (LY7 Static Fill) (Service and Repair).
2. Remove the upper fascia retainers from the radiator support.
3. Remove the upper radiator bracket bolt from the radiator support.
4. Remove the upper radiator bracket from the radiator.
5. Remove the radiator inlet hose clamp from the radiator.




6. Remove the radiator inlet hose from the radiator.




7. Remove the radiator inlet hose clamp from the engine.
8. Remove the radiator inlet hose from the engine.

Installation Procedure




1. Install the radiator inlet hose to the engine.
2. Install the radiator inlet hose clamp to the engine.




3. Install the radiator inlet hose to the radiator.




4. Install the radiator inlet hose clamp to the radiator.
5. Install the upper radiator bracket to the radiator.

Caution: Refer to Fastener Caution (Fastener Caution).

6. Install the upper radiator bracket bolt to the radiator support. Tighten the bolt to 20 Nm (15 lb ft).
7. Install the upper fascia retainers to the radiator support.
8. Fill the cooling system. Refer to Cooling System Draining and Filling (LY7 GE 47716 Fill) (Service and Repair)Cooling System Draining and Filling (LNJ GE 47716 Fill) (Service and Repair)Cooling System Draining and Filling (LNJ Static Fill) (Service and Repair)Cooling System Draining and Filling (LY7 Static Fill) (Service and Repair).