Transmission Brace Replacement

Transmission Brace Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).




2. Remove the transaxle brace to engine oil pan bolts (2).
3. Remove the transaxle brace to transaxle bolt (1).
4. Remove the transaxle brace (3).

Installation Procedure




1. Install the transaxle brace (3).

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the transaxle brace bolts (1, 2) and tighten to 50 Nm (37 lb ft).
3. Lower the vehicle.