Engine Mount Replacement - Right

Engine Mount Replacement - Right Side

Removal Procedure




1. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement (Service and Repair).
2. Remove the drive belt. Refer to Drive Belt Replacement (Service and Repair).
3. Support the engine. Refer to Engine Support Fixture (Engine Support Fixture).
4. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).
5. Remove three upper engine mount bracket bolts (1).
6. Loosen right upper front engine mount bracket bolt (2).




7. Remove the upper engine mount bracket nuts (1).
8. Remove the lower bracket bolts (2).
9. Remove the ABS connector clip from the frame.
10. Remove the mount (3) and the lower bracket (4) from the vehicle.




11. Remove the upper bracket bolt (1) from the bracket.
12. Remove the upper bracket.




13. Remove the engine mount (3) from the lower bracket (4).

Installation Procedure




1. Install the engine mount (3) to the lower bracket (4).




2. Install the engine mount upper bracket and bolt (1) to the engine. Do not tighten the bolt.
3. Install the ABS connector clip to the bracket.





Caution: Refer to Fastener Caution (Fastener Caution).

4. Install the lower bracket bolts (2) and tighten to 50 Nm (37 lb ft).
5. Tighten the upper engine mount bracket nuts (1) to 50 Nm (37 lb ft).




6. Install the upper engine mount bracket bolts (1) and tighten to 50 Nm (37 lb ft).
7. Tighten the right upper engine mount bracket bolt (2) to 110 Nm (81 lb ft).
8. Lower the vehicle.
9. Remove the engine support. Refer to Engine Support Fixture (Engine Support Fixture).
10. Install the drive belt. Refer to Drive Belt Replacement (Service and Repair).
11. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement (Service and Repair).