Rear Window Washer Pump Hose Replacement - Washer Pump to Liftgate
Rear Window Washer Pump Hose Replacement - Washer Pump to Liftgate
Removal Procedure
1. Remove the right cowl trim panel. Refer to Cowl Side Trim Panel Replacement (Service and Repair).
2. Remove the right center lower trim panel. Refer to Center Pillar Lower Trim Panel Replacement (Service and Repair).
3. Remove the right rear quarter trim panel. Refer to Rear Quarter Trim Panel Replacement - Right Side (Service and Repair).
4. Disconnect the rear washer hose from the rear washer pump.
5. Disconnect the rear washer hose from the washer solvent container.
6. Disengage the washer hose grommet (1) from the dash panel below the plenum in behind the wiper module.
7. Cut the tape securing the washer hose to the electrical harness loom for the full length back to the D-pillar hose connection
8. Disconnect the hose from retainers in the rear quarter.
9. Partially lower the headliner at rear of vehicle to access the washer hose at the jumper. Refer to Headlining Trim Panel Replacement (Service and Repair).
10. Disconnect the washer hose (1) at the liftgate jumper hose connection (2).
11. Pull the rear washer hose end out through the opening in the dash panel.
12. Remove the rear washer hose from the right side of the vehicle.
Installation Procedure
1. Route the rear washer hose (1) along the right side of the vehicle and secure the retention clips (2).
2. Apply washer solvent to the rear washer hose ends in order to secure to the liftgate connection (3).
3. Position the headliner and secure in place. Refer to Headlining Trim Panel Replacement (Service and Repair).
4. Install the rear washer hose end through the opening in the dash panel.
5. Tape the washer hose to the electrical harness loom approximately every 101.6-127 mm (4-5 in) apart beginning at the rear and working forward to the washer hose dash panel grommet.
6. Secure the washer hose grommet (2) to the front dash panel (1).
7. Connect the forward portion of the rear washer hose to the washer solvent container, rear washer pump spout.
8. Install the rear quarter trim panel. Refer to Rear Quarter Trim Panel Replacement - Right Side (Service and Repair).
9. Install the lower center trim panel. Refer to Center Pillar Lower Trim Panel Replacement (Service and Repair).
10. Install the right cowl trim panel. Refer to Cowl Side Trim Panel Replacement (Service and Repair).