Engine Mount Strut Bracket Replacement - Upper Radiator Support

Engine Mount Strut Bracket Replacement - Upper Radiator Support

Removal Procedure




1. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement (Service and Repair).
2. Loosen and remove the engine mount strut to engine mount strut bracket through bolts (1, 3) and nuts (2, 4).
3. Rotate the engine mount struts up out of the way.




4. Remove the engine mount strut bracket bolts (1, 2).
5. Remove the engine mount strut brackets (3, 4).

Installation Procedure




1. Position the engine mount strut brackets to the radiator support (3, 4).

Notice: Refer to Fastener Notice (Fastener Notice).

2. Install the engine mount strut bracket bolts (1, 2).

Tighten the bolts to 50 N.m (37 lb ft).




3. Rotate the engine mount struts into position.
4. Install and tighten the engine mount strut to engine mount strut bracket through bolts (1, 3) and nuts (2, 4).

Tighten the bolt/nut to 48 N.m (36 lb ft).

5. Install the intake manifold cover. Refer to Intake Manifold Cover Replacement (Service and Repair).