Rear Side Door Conduit Replacement

Rear Side Door Conduit Replacement

Removal Procedure

1. Remove the door trim panel.
2. Remove the water deflector.




3. Release the clip that retains the lock rod to the handle.
4. Remove the lock rod from the handle.
5. Remove the nut that retains the handle and bracket to the door.
6. Remove the bracket from the handle.
7. Remove the handle from the door.

Installation Procedure




1. Install the handle to the door.
2. Install the bracket to the handle.

Notice: Refer to Fastener Notice.

3. Install the nut that retains the handle to the bracket.

Tighten the nut to 10 N.m (89 lb in).

4. Install the lock rod to the handle.
5. Install the clip that retains the lock rod to the handle.
6. Install the water deflector.
7. Install the door trim panel.